VicRoads Approved Plastic Road Barriers

If you’re a contractor working on a road project in Victoria, it’s likely that you’ll need to source some temporary safety barriers. These will ensure your team are protected from potential vehicle hazards whilst you’re working in the road corridor.

Working alongside the road is always a high-risk activity as you and your team are in proximity to fast-moving vehicles. Therefore, it’s important that you don’t just use any old plastic safety barrier and you should make sure it’s up to the task.

Aside from keeping your workers safe, you need to ensure you’re meeting other compliance obligations too. Any contractors working on the declared road network in Victoria need to ensure they’re using a product that is in line with the VicRoads standards for safety barriers.

Certain crash barriers have been tested and proven to meet the VicRoads criteria, so for Victorian civil contractors, roadwork crews and anyone working alongside the road network, it’s important to make sure you buy safety barriers that have this tick of approval.

Which barriers are accepted safety barrier products for work on the VicRoads network?

Although the VicRoads documentation says that safety barrier selection is “an intricate process that requires engineering judgement and risk assessment”, it does have a number of temporary safety barriers that have been pre-assessed and approved to suit most applications.

The VicRoads Road Design Note 06-04 lists the safety barrier products that VicRoads has assessed and considers acceptable for use on the declared road network.

For roads that are not on the declared road network, like minor local roads, the Council responsible for that particular area can offer additional guidance. In some cases other barriers are acceptable, but if you’re working on most main roads you’ll need to follow the Vic Roads criteria.

View the complete VicRoads Road Design Note RDN 06-04 – Accepted Safety Barrier Products here.

These VicRoads approved temporary barriers are available from Jaybro

The MASH and the Lo-Ro crash-tested water filled barriers are approved for use on Victorian roads. Both these products are available to buy from Jaybro.

About the MASH

Crash tested to MASH TL1 and TL2, offers both 50km/hr and 70km/hr work zone protection. To comply with VicRoads temporary barrier specifications, a minimum length of 48 metres is required.

This high-performance barrier can be used for both median and roadside applications, in straight runs or with slight curves. This flexibility means contractors can set up their barriers in a range of different configurations, around obstructions and curves.

Each strong, UV stabilised polyethylene module is designed to absorb nuisance impacts and will deflect heavy impacts reliably to ensure a safe work site. Yellow terminal end treatments are also available to match, completing the system and making it approved for use on main roads across Melbourne and the rest of Victoria’s road network.

The MASH barrier has been designed with easy setup and pack down in mind. A galvanised joining pin makes it easy to join the barriers together, resulting in fast deployment. This means it can be set up quickly and easily on site to keep your job on track. Plus, its freight-friendly design helps to reduce shipping costs.

The longitudinal barrier weighs 56kg empty, meaning it can be handled by two people on site. However, after filling with water, it weighs a hefty 496kg. Our customers typically use a water cart or tanker to fill the barriers due to the large volume of water needed.

Note that if your barriers are subject to an impact during the course of your project, the damaged components must be replaced – repaired components must not be used as they can present a safety hazard.

Find out more about the here or get a quote.

You can also view the VicRoads approval here: Plastic Water Filled System – Temporary

About the Lo-Ro Water Cable Barrier

New to the Australian market and exclusive to Jaybro, the Lo-Ro water cable barrier is approved to MASH TL2 and designed for applications where low deflection is critical.

Compared to other barriers it has the best TL-2 deflection, shorter clear zones and shorter minimum length, saving you money and installation time whilst still providing excellent protection.

Designed and approved for speed zones up to 70km/hr, it provides good protection when installed on a range of pavement surfaces, from finished concrete surfaces to unsealed compacted ground. Plus, the Lo-Ro has multi-speed deflection having successfully been tested to MASH TL1.

The Lo-Ro barrier is completely repairable in every location of the barrier, unlike others on the market. This makes the Lo-Ro barrier an economical choice for locations where light knocks and bumps are likely.

Find out more about the Lo-Ro here or get a quote.

You can also view the VicRoads approval here: Lo-Ro Water Cable Barrier – Temporary.

The Jaybro team is here to help

Not sure which barrier to choose, what the differences are or how to ensure you’ve got all the boxes ticked for your project?

We’re here to help!

The expert barrier team at Jaybro can offer honest and unbiased advice on how to choose the best barrier for your Victorian roadwork projects.

Jaybro’s Melbourne warehouse is located in Laverton North and we stock a large quantity of water filled barriers for different purposes. We can offer advice, provide an itemised quote with freight and other options, and deliver quickly and efficiently to sites across the state.

Call us anytime on 1300 885 364 or contact Ben Lorne for detailed information.