Sign In 
Universal Dowel Sleeve Round 20mm x 300mm
Full length dowel sleeves suitable for a wide variety of jointing applications. Available for round or square dowels.
Features and Benefits
Installation
For use with Connolly Key Joint
Remove the pre punched "knock outs" (at 150mm centres if required) with a firm sharp blow using one of the supplied pegs.
Position sleeve with support leg horizontal to ground, so sleeve flange fits into key joint knockout holes. Push sleeve firmly against steel backing and twist 90 degrees to secure key joint.
Insert dowels into the sleeves and place the reinforcing mesh. Chair the mesh to provide clearance to the dowels. Walking on the mesh should not affect the alignment of the dowels.
Pour concrete to both sides of the joint and finish to the top of the key joint.
For use at Construction Joints
Flick a chalk line along the form board at the centre of the slab thickness. Nail the face fixing caps onto the form board with the supplied nails. Insert sleeves onto the fixing caps prior to pouring the concrete. To make the job easier the sleeves can be installed after the reinforcement has been laid and chaired.The face fixing caps can also be screwed to steel formwork using self drilling screws.
When concrete has hardened, the form board can be stripped to expose the open end of the sleeves. The face fixing caps remain in place ready for preparation of the next slab.
Insert the appropriate dowels into the sleeves as the next pour is being prepared. To eliminate tripping, the dowels can be installed after the groundwork has been completed for the adjacent pour.
For use with Saw Cut Joints
If desired, Connolly Universal Dowel Sleeves can be used as part of a ready made dowel assembly.
For a more economical and simple alternative the sleeves can be used in combination with Connolly Truline Dowel Caps to form a simple dowel assembly. Both the sleeves and the caps simply clip onto chaired R10 or Y12 support bars.
Ideal for any and all continuous pour applications where the need for expansion is required. Note that the 12mm sleeves can also be nailed to timber formwork for use at construction joints.
Specifications
| Product Code | 40-UDS16R230 | 40-UDS16SQ230 | 40-UDS20R230 | 40-UDS20SQ230 | 40-UDS24R225 | 40-UDS12R150 |
| Dowel Shape | Round | Square | Round | Square | Round | Round |
| Dowel Size | 16 mm diameter | 16 mm x 16 mm | 20 mm diameter | 20 mm x 20 mm | 24 mm diameter | 12 mm diameter |
| Sleeve & Cap Material | Polypropylene | Polypropylene | Polypropylene | Polypropylene | Polypropylene | Polypropylene |
| Dowel Lengths | 400 mm to 600 mm | 400 mm to 600 mm | 400 mm to 600 mm | 400 mm to 600 mm | 400 mm to 450 mm | 300 mm |
| Sleeve Length | 230mm | 230mm | 230mm | 230mm | 225mm | 150 mm |
| End Expansion | Yes=18mm | Yes=18mm | Yes=18mm | Yes=18mm | Yes=12mm | Yes=13mm |
| Lateral Expansion | No | Yes=6mm | No | Yes=6mm | No | No |
| Colour | Pink | Green | Blue | Yellow | Brown | Green |
| Support Leg | Yes | Yes | Yes | Yes | Yes | Yes |
Please contact Jaybro for a quote on your specific project.
| CODE | 40-UDS20R300 |
|---|---|
| U.O.M | Each |
| Type | Round |
| Brand | Connolly |
| Size | 20 mm |
| Length | 300 mm |
Print Spec Sheet
