VIPSeal Standard Coupling (VSC) 265-290mm

Primarily used in sewers, drains & other low and non-pressurised applications, VIPSeal standard couplings join pipes of any material or diameter. They are fully approved for use in various water networks including Sydney Water, South East Water and Unitywater, and have WSAA, Watermark & Australian Standards approval.

They are ideal for low pressure and non-pressurised applications such as sewers, drains and water pipes. Using VIPSeal couplings removes the need for a complicated assortment of joiners and reducers. In contrast to compression fittings, electrofusion or solvent cement methods, using an elastomeric sleeve in low-pressure pipe joining enables workers to repair pipes simply and reliably without specialist equipment.

Constructed from the highest quality elastomeric rubber, the VIPSeal couplings create a leak-proof seal. In addition, the couplings are bolstered by stainless steel tension bands, proving strength and resistance under heavy earth loads. To fit VIPSeal, simply slide the coupling onto each end of the pipes to be joined and tighten the tensioning bands to the recommended torque.

VIPSeal elastomeric couplings are manufactured in the UK from synthetic rubbers such as EPDM, SBR, NBR, and FKM synthetic rubber. The incorporation of a Grade 316 Stainless Steel metal shear band on the flexible coupling counters the effect of soil or other superimposed load, to ensure rigidity and integrity of the joint. Each coupling has a designed compatible pipe OD range and is suitable for connection to a wide range of pipe materials including PVC, PE, vitrified clay, asbestos cement, concrete, galvanised iron and cast or ductile iron. Note that the couplings are not suitable for use with drinking water. They offer excellent resistance to sewerage and drainage effluent and are ideal for using as:

a coupling to join pipes

repairing damaged sections of pipe

where a post or lateral connection is required

joining different diameters of pipe

joining short lengths of pipe

SPECIFICATIONS

265 mm - 290 mm

316 Stainless tensioning bands

Elastomeric rubber construction

Available in a range of other sizes

APPROVALS

AS/NZS 4327:1995 Metal-banded flexible couplings for low-pressure applications

Unitywater approved

Sydney Water approved

South East Water approved

Approved to WaterMark scheme

WSAA approval

ALSO AVAILABLE

When pipe diameters differ significantly, VIPSeal elastomeric sleeves act as a bush when fitted to the smaller pipe. By creating a larger diameter, the pipe can then accommodate a standard coupling. Available for a range of pipe OD diameters, bushes help to create the ideal seal on tricky jobs. Take a look at the range of bushes here.