VIPSeal Standard Coupling (VSC) 175-200mm
They are ideal for low pressure and non-pressurised applications such as sewers, drains and water pipes. Using VIPSeal couplings removes the need for a complicated assortment of joiners and reducers. In contrast to compression fittings, electrofusion or solvent cement methods, using an elastomeric sleeve in low-pressure pipe joining enables workers to repair pipes simply and reliably without specialist equipment.
Constructed from the highest quality elastomeric rubber, the VIPSeal couplings create a leak-proof seal. In addition, the couplings are bolstered by stainless steel tension bands, proving strength and resistance under heavy earth loads. To fit VIPSeal, simply slide the coupling onto each end of the pipes to be joined and tighten the tensioning bands to the recommended torque.
VIPSeal elastomeric couplings are manufactured in the UK from synthetic rubbers such as EPDM, SBR, NBR, and FKM synthetic rubber. The incorporation of a Grade 316 Stainless Steel metal shear band on the flexible coupling counters the effect of soil or other superimposed load, to ensure rigidity and integrity of the joint. Each coupling has a designed compatible pipe OD range and is suitable for connection to a wide range of pipe materials including PVC, PE, vitrified clay, asbestos cement, concrete, galvanised iron and cast or ductile iron. Note that the couplings are not suitable for use with drinking water. They offer excellent resistance to sewerage and drainage effluent and are ideal for using as:
SPECIFICATIONS
APPROVALS
ALSO AVAILABLE
When pipe diameters differ significantly, VIPSeal elastomeric sleeves act as a bush when fitted to the smaller pipe. By creating a larger diameter, the pipe can then accommodate a standard coupling. Available for a range of pipe OD diameters, bushes help to create the ideal seal on tricky jobs. Take a look at the range of bushes here.
CODE | VSC200A |
---|---|
U.O.M | Each |
Width | 150 mm |