Max Frank Fibre Concrete Spacers

Getting the right amount of concrete cover is essential for the durability of reinforced concrete structures. Max Frank fibre concrete spacers ensure correct concrete cover before and during concreting. They are characterized by high compressive strength and excellent chemical and physical resistance.

The spacers fulfil the requirements of all exposure classes. All recipes used are tested by independent testing institutes with regard to the required properties./p>

Overall advantages:

High density with low porosity

High load-bearing capacity

Same material properties as the structural concrete

Excellent bond with the structural concrete, no hairline cracks

KOMO certified according to the Dutch assessment guideline BRL2817

Bar Spacers

High compressive strength, no deformation in heat or cold, concrete cover accurately maintained

Ideal for impermeable concrete, no hairline cracks between the spacer and the concrete

Large support area- reduced pressure on the formwork

Substantial labour cost savings due to rapid and simple laying

Fire resistant to the highest requirements specified in EN13501-1:2002 - Class A1 (non combustible)

All bar spacers over 330 mm long have increased resistance to breakage due to a reinforcing thread

Block Spacers

High compressive strength, no deformation in heat or cold, concrete cover accurately maintained

Spacers remain in position during formwork erection and concreting

Ideal for impermeable concrete, no hairline cracks between the spacer and the concrete

Profiles Available

Flat or arched support surface, with steel clips or cross clips

Snake, banana or rail types

Triangular, square or round profiles

Triangular concave with hook

Triangular with tie wire

Combined spacers with steel rail

Please contact Jaybro for a quote on your specific project.