Liquid Hammer Concrete Remover Concentrate 20 L

Liquid Hammer is designed to safely remove hardened concrete from construction equipment. Liquid Hammer does not contain any muriatic, phosphoric or citric acids making it safe for the user, the equipment, and the environment.

The tough formula effectively dissolves hardened cement, concrete, stucco, mortar, grout, and more. It is safe to use on virtually every surface including aluminum, chrome, glass, and all plastics. It removes concrete without damaging the equipment, and keeps vehicles and equipment looking new. Its non-corrosive formula means that even sensitive engine components can be cleaned without causing damage. The product is 100% biodegradable and will not affect any stormwater runoff streams.

Liquid Hammer can be used on all types of vehicles including ready mix trucks, pump trucks, water tankers, spreaders, job-site equipment, and quarry equipment. It can also be used in man lifts, truss screeds, laser screeds, mixing equipment, pumping equipment, trowels, concrete buggies, concrete cutting, sawing and boring equipment, all types of forms, form hardware, and much more. Just one application of Liquid Hammer will remove light build-up. Moderate to severe build-up may require regular applications over a period of days or weeks.

Cleaning with a Liquid Hammer can spare you the costs of repainting equipment, replacing parts damaged by acid, related on-the-job injuries, and environmental oversight.

Features:

Ideal for:

APPLICATION

Surface Preparation:

Use Liquid Hammer in conditions that will prevent the surface from drying out too quickly - do not apply in very hot, sunny or windy conditions. It is most effective when used in shaded areas or during evening hours. Always test Liquid Hammer in a small area first. It is best applied using a foaming sprayer. Depending on the sprayer you use, you will get different thickness or qualities of foam.

Mixing:

Liquid Hammer is available as a ready to use formula and also as a concentrate. For old concrete, use a 1:1 ratio Liquid Hammer concentrate to water. For fresh concrete use a 1:3 ratio.

Application:

Apply generously and wait for 15 minutes, or until the foam has turned the concrete into a paste. With heavy buildup or older concrete Liquid Hammer may need to be re-applied if a paste does not form. Several applications may be required, and/or brushing. Once a paste has formed, rinse with water and agitate or pressure wash.

Note that Liquid Hammer will also act as a degreaser as well as removing concrete/cement.