TERRAM Bodpave 85 - 50x500x500mm
POROUS PAVERS, GRASS OR GRAVEL REINFORCEMENT
TERRAM Bodpave 85 is a porous plastic cellular paving grid for reinforcing grass or gravel where a permeable/porous surface is required. It resists lateral movement, improves traction and allows expansion & contraction whilst promoting optimum grass growth, root protection and surface stabilisation. The open cell structure provides high surface water infiltration and is suitable for source control within a SUDS profile.
TERRAM Bodpave™ 85 can be installed with either a grass or gravel filled surface to provide a durable, safe and eco-friendly surface for pedestrian and vehicles trafficked areas. TERRAM Bodpave™ 85 is a cost effective solution to worn & rutted grassed areas, displaced gravel and for source control of surface water run-off.
BENEFITS
GRASSED SURFACES
Grass car parks, overflow grass car parks, grass paths, residential lawn parking, grass access routes with a full construction profile
GRAVEL SURFACES
Gravel driveways, grave car parks, gravel coach parks, access roads, caravan standings with a full construction profile
‘REDUCED DIG’
Where a firm or reinforced ground already exists and where lighter applications may be required for both grass and gravel surfaces
Downloadable Resources:
TERRAM Bodpave 85 - Product Spec Sheet
Applications:
Specifications
Characteristics | Values |
Paver Size (mm) | 500 x 500 x 50 + 35 embedding spike for gradients |
Load-bearing capacity (filled) | 400 t/m2 |
Crush resistance (unfilled) | 250t |
Connection & locking type | Overlapping edge loop & cell connection with integral, self-locking, snap-fit clips |
Basal support & anti shear | Integral 35mm long ground spikes (18/paver) with cross & T section |
Dimensions | 500mm x 500mm x 50mm deep plus 35mm long ground spike |
Cell wall thickness | 2.5mm - 4.4mm |
Nominal internal cell dimensions | 67mm (cruciform) & 46mm (round) |
% open cell | 92% (top)/75% (base) |
Quantity per m2 | 4 pavers |
Weight | 1.56kg (6.24kg/m2) |
Polymer | Recycled high density polyethylene |
Resistance EN ISO 12225 | 100% 500 hours |
UV resistance ASTM D4355 | 100% retention after 500 hours |
Toxicity | Non toxic |
CODE | BPAVE85 |
---|---|
U.O.M | SQM |
Swatch | no_selection |