Water filled pedestrian barriers for airport crowd control

Trafix 2000 Pedestrian Barriers Increase Safety

Security and safety are major considerations in any airport. Over 300 of Jaybro’s Trafix 2000 water filled barriers are being used at the Gold Coast airport to provide crowd control and safety on the tarmac.

The domestic terminal at Queensland’s Coolangatta airport has taken advantage of the lightweight and versatile Trafix 2000 pedestrian barrier as a security and safety measure.

Positioned in rows that funnel passengers safely along walkways, these simple yet sturdy barriers are ideal for preventing passengers from wandering too far from the pedestrian walkway as they exit the gate to board their plane. They have been positioned in such a way as to encourage orderly queueing, guiding passengers to the pedestrian pavement markings and towards the aircraft.

Trafix 2000 barriers are made from blow moulded plastic that is easy to fill with water once positioned. When full, they weigh over 320kg, ensuring they cannot be moved accidentally or bumped by small vehicles such as baggage trailers on the runway.

The barriers also serve an important safety purpose by separating people and vehicles that service the planes, such as refuelling trucks.

Jaybro supplied over 300 Trafix pedestrian barriers to the airport for this purpose, increasing safety for patrons and at the same time eliminating a hazard for the ground crew.

About The Trafix Pedestrian Barriers

Jaybro’s Trafix pedestrian barrier is an Australian designed and manufactured water filled barrier that has been built for tough conditions.

Available in highly visible red and white, the strong UV-protected polyethylene gives added durability against the harsh Australian sun. Simple and lightweight to install when empty, each module weighs just 20kg before filling. After installation and once filled with water, each barrier weighs 327kg, providing a significantly stable and secure barrier.

With rounded corners and built-in handles that make it easy for workers to handle, plus a simple interlocking pin and hole system to join them together, these simple barriers are fast and easy to install.

The barrier is made from recyclable polyethylene and is available in 2 metre long modules. It is ideal for use in pedestrian delineation applications such as this, as well as for cordoning off no-go zones, drop-offs and pits on work sites. Lights and signage can also be attached, transforming the barriers into a 24-hour traffic control product.